Full Fill Built-in Insulation System Continuous wall insulation system that delivers ultimate thermal performance with the added assurance of protection from wind driven rain.

>Find out more
right image

Xtratherm offer an extensive range of technically enhanced rigid insulation products for commercial and industrial projects

>Find out more

Tapered Roofing System
The XtraFall system provides a high performance precision solution to thermal insulation and water drainage on at roofs.

>Find out more
right image

The Xtratherm range of high performance insulation boards provides the ideal technically advanced solution for flat roof projects.

>Find out more
right image

Vacuum Insulated
Panels (VIP)

Insulation System
for Flat Roofs & Balconies

> Find out more
right image

PLATINUM SERVICE for Self Builders

PLATINUM SERVICE for Self Builders

Our Platinum Service offers full technical support and advice, helping you to achieve a cost effective, passive
standard new home.

>Find out more
right image

Sustainable insulation

This sustainable insulation range has a bio-enhanced, halogen-free formulation, with a more than 50% reduction in packaging where all plastic wrap is replaced with biodegradable film.

Full Fill Built-in Insulation System

Continuous wall insulation system that delivers ultimate thermal performance
with the added assurance of protection from wind driven rain.

> Visit cavitytherm.com

High Performance rigid extruded polystryrene

XPS

Insulation System for Flat Roofs & Balconies

XtraVIP Insulation System for Flat Roofs & Balconies is a rigid Vacuum Insulation Panel (VIP), consisting of a compressed, fumed, silica sand, microporous core which is evacuated of air and moisture before being
encased and sealed in a special thin, gas-tight, hybrid aluminium foil envelope. Encapsulated and protected within a robust two component elastomeric polyurea waterproof coating.

XtraVIP

Xtratherm offers a cost effective solution for builders and specifiers for the closing of cavities around window and door openings, preventing cold bridging, damp penetration, air infiltration and condensation.

CavityTherm Accessories

Code for Sustainable Homes

The Code for Sustainable Homes was introduced in 2007 for Social Housing construction in the UK. Xtratherm is the insulation of choice to achieve CSH levels 4 and above in traditional build specification. The introductions of the FEES standard in 2010 clarified the specification required for Zero Carbon standards in 2016. Xtratherm can help you achieve these standards in a practical affordable way.

Global Warming Potential (GWP) of Insulants: POL1:

This credit looks specifically at foamed thermal and acoustic insulation products that use gases (blowing agents) during the manufacturing process. The GWP of all blowing agents is relative to the GWP of carbon dioxide (GWP = 1), the primary greenhouse gas.

Blowing agents that are ‘deemed to satisfy’ the GWP<5 requirement of POL1 are: air, carbon dioxide, pentane (iso-pentane, cyclopentane, n-pentane) and isobutene

Xtratherm has four main product groups, all blown with Pentane gas with a GWP < 5

  • Thin-R Foil faced Polyisocyanurate (PIR) insulation board
  • XtroLiner Class ‘O’ Polyisocyanurate (PIR) insulation board
  • Safe-R Phenolic foam rigid insulation board
  • Warm-R Expanded Polystyrene (EPS) with graphite / carbon enhancement,
    insulation board
  • Hytherm Expanded Polystyrene (EPS), insulation board

Search

Request a Call Back

    All the members of our technical team are individually BBA accredited to help you reach your low energy goals. Fill out your details below to request a call back: